The DW300m fuel pump has been specifically designed and tested for compatibility with gasoline and ethanol. DeatschWerks products are manufactured and sold for non-road vehicles used solely for competition.
DW300m at 13.5 volts
Flow Data Notes:
- Values represent a 10 pump average collected in-house.
- Every fuel pump is tested by DeatschWerks to be within specifications for flow, PRV activation and amperage draw.
- BHP horsepower figures are approximation only and can vary significantly depending on your set-up.
|Weight||10.6 oz (300grams)|
|External Materials||electroplated steel|
|Inlet Fitting||7.7mm ID,11.0mm OD|
|Outlet Fitting||5/16" hose clamp|
|Impeller Design||Single Scroll Composite Turbine|
|Connector Terminal||Spade pos/neg|
|Min Voltage Input||6 volts|
|Max Voltage Input||18 volts|
|Current Draw (40psi)||11.2 amps (13.5v)|
|Current Draw (80 psi)||13.7 amps (13.5v)|