Menu

DW250iL Fuel Pump Tech

Technical Information

The DW250iL fuel pump has been specifically designed and tested for compatibility with pump gas and most race fuels. The DW250iL is not compatible with fuels with ethanol content above 15%. DeatschWerks products are manufactured and sold for non-road vehicles used solely for competition.

Flow Data

DW250il at 13.5 volts

PSIGAMPSLPHBHP
0 6.1 310 975
30 9.2 265 835
40 9.9 250 785
50 10.7 240 755
60 11.6 230 725
70 12.5 220 695
80 13.5 210 660
90 14.6 200 630
100 15.6 190 600

 

Flow Data Notes:

  • Values represent a 10 pump average collected in-house.
  • Every fuel pump is tested by DeatschWerks to be within specifications for flow, PRV activation and amperage draw.
  • BHP horsepower figures are approximation only and can vary significantly depending on your set-up.

Mechanical Specs

Weight 25oz (690grams)
External Materials Hard Anodized Aluminum
Inlet Fitting -6 AN ORB
Outlet Fitting -6 AN ORB
PRV Activation NA
Impeller Design Roller-Vane

Electrical Specs

Connector Terminal Binding Post
Min Voltage Input 8 Volts
Max Voltage Input 18 volts
Current Draw (40psi) 9.9 amps (13.5v)
Current Draw (80 psi) 13.5 amps (13.5v)

 

Contact

415 E Hill Street
Oklahoma City, OK 73105
Phone: 1.405.217.0701
Toll-free: 1.800.419.6023
Fax: 1.405.217.0700

FacebookTwitterYouTube