Menu

DW100 Fuel Pump Tech

DW200 Fuel Pump Tech

Technical Information

The DW100 fuel pump has been specifically designed and tested for compatibility with gasoline and ethanol. DeatschWerks products are manufactured and sold for non-road vehicles used solely for competition.

Flow Data

DW100 at 13.5 volts

PSIGAMPSLPHBHP
0 2.8 265 865
30 3.9 180 540
40 4.2 165 500
50 4.6 140 420
60 5 120 350
70 5.4 100 290
80 5.8 80 230
90 6.2 55 150
100 6.6 25 60

 

Flow Data Notes:

  • Displayed data represents a 10 pump average of results collected in-house.
  • Every fuel pump is tested by DeatschWerks to be within specifications for flow, PRV activation, and amperage draw
  • BHP horsepower figures are for approximation only and can vary significantly depending on your set-up.

Mechanical Specs

Weight 12.6oz (360grams)
External Materials Electroplated steel
Inlet Fitting 7.7mm ID, 11.0mm OD
Outlet Fitting 5/16" hose clamp
PRV Activation 100psi
Impeller Design Single Scroll Composite Turbine

Electrical Specs

Connector Terminal Spade pos/neg
Min Voltage Input 6 volts
Max Voltage Input 18 volts
Current Draw (40 psi) 4.2 amps (13.5v)
Current Draw (80 psi) 5.8 amps (13.5v)

Contact

1745 W. Sheridan Ave.
Oklahoma City, OK 73106
Phone: 1.405.217.0701
Toll-free: 1.800.419.6023
Fax: 1.405.217.0700

FacebookTwitterYouTube