DeatschWerks Injector Services
Available on any fuel injector ... OEM, Aftermarket, Sidefeed, and Topfeed
We have taken what we have learned from building precision high flow injectors and applied these same principles to develop the ultimate injector cleaning and flow testing system. THREE levels of service are available to suit your needs, but each service receives the same quality and attention to detail that we put into our own highflow injectors. Also, all injector services are performed on the same precision calibrated equipment that we use on our own injectors... so you know the results you get are dead on.
The first photo is an example of the typical results obtained from injectors in need of cleaning. Clean injectors provide increased/safer power, higher gas mileage, decreased emmisions, and better idle quality. The second image shows the results of our DeatschWerks injector services.
 |
 |
Ordering
Ordering injector services through DeatschWerks is quick and easy. Simply choose the injector service you want (see descriptions below). Print out and complete the PDF order form. Then package your injectors with the order form and send it to the address at the bottom of the form. Be sure to package your injectors in plastic to ensure no residual fuel is leaked during shipping. Feel free to contact us if you have any questions or need help making a decision.
ALL PRICES ARE PER INJECTOR
Click the pdf icon for the services order form.
Basic Service
- Looking for better gas mileage, smoother operation, and crisper acceleration?
- Installing used injectors and want to be sure they are clean and operating properly?
Then the Basic Service is for you!
| PROCESS | BENEFIT |
|---|---|
| 3-step ultrasonic cleaning | Optimum atomization and flow |
| Replace o-rings, filters, and seals | Ensure leak free operation |
| Check coil | Discover coil problems |
| Leak test 100psi | Find leaks at pintle |
| RPM ramp test | Exclusive DeatschWerks test |
| Pulse-width ramp test | Exclusive DeatschWerks test |
| Spray pattern analysis | Verify Proper atomization |
| Static flow test | Check balance of flow rates |
| ID etching | Links each injector to results on report |
| Lubricate and Bag | Preserves optimum working condition |
| System calculations | min/max/avg flow and system balance |
| basic report (1 page) | Visualize your results in COLOR |
Dynamic Service
- Having an engine problem and suspect the fuel injectors?
- Tuning your car for more boost and want to yield the higher and safer whp?
Then the Dynamic Service is for you!
| PROCESS | BENEFIT |
|---|---|
| the Dynamic Service includes everything in the Basic Service plus ... | |
| Dynamic flow testing | Simulates real driving conditions |
| Flow-rate pretest | Before and after comparison |
| Dynamic flow testing | Simulates real driving conditions |
| Fuel pressure calculations | Valuable tool for FMU/AFPR users |
| Performance calculations | Defines limits of fuel system |
| Dynamic Report (2 page) | Visualize your results in COLOR |
Dynamic PLUS Service
- Are you the picky type who demands only the best for their car?
- Are you a tuning your car for maximum power and efficiency?
Then the Dynamic PLUS Service is for you!
| PROCESS | BENEFIT |
|---|---|
| the Dynamic PLUS Service includes everything in the Basic AND Dynamic Service plus ... | |
| Customer defined testing parameters | If desired, you can choose testing pressure, duty cycles, rpms, etc. to build a complete custom test |
| Advanced coil testing | Loaded/unloaded and at various operating temps |
| True balancing and blue printing | Bring atomization and flow to within 3% |
| Lag Measurement | Valuable tuning tool (upon request) |
| 10-point dynamic test | Maps injectors through all duty cycles |
| Linearity testing | Graphs injector flow during entre range of duty cycles |
| Dynamic PLUS report (3 pages) | Visualize your results in COLOR |